Gold Member Since 2013
Audited Supplier
Dongguan Qingfeng Electrical Machinery Co., Ltd.

Cable Extruder, Cable Extrusion Line, Extruder manufacturer / supplier in China, offering Coaxial Cable Extruder, Chemical Foaming Wire and Cable Extrusion Line, Foam Wire Cable Extruder Machine and so on.

(/ )

Coaxial Cable Extruder

This product is currently unavailable, but you may contact the supplier directly, for further interest.
Basic Info
  • Model NO.: QF-65+35
  • Plastic Processed: PE
  • Feeding Mode: Multiple Feed
  • Screw: Single-Screw
  • Screw Channel Structure: Deep Screw
  • Automation: Automatic
  • Coaxial Cable: Coaxial Cable Extruder
  • Physical Foaming Extrusion Coaxial Cable: Physical Foaming Extrusion Line
  • Type: PVC, PE, PP, PU, Nylon and So on
  • Product Type: Extrusion Molding Machine
  • Assembly Structure: Separate Type Extruder
  • Engagement System: Full Intermeshing
  • Exhaust: Don′t Exhaust
  • Computerized: Computerized
  • Coaxial Cable Machine: Coaxial Cable Equipment
  • Trademark: QF
Product Description
QF-65+35 Physical Foaming Extrusion Line

1. Application
Physical foaming cable extruding machine apply for extruding low loss core wire of all kinds of coaxial cable, such as single layer, dual layer insulating core-wire (F/ S) for communication cables, such as HDMI, Display Port, IEEE1394, DVI, VGA, ATA etc.
Coaxial cable production process:
(1). Physical foam extrusion line for making PE foaming insulation coaxial wire
(2). Braiding machine for doing the braiding wire and tapping the al foil on the coaxial wire
(3). PVC extrusion line for sheathing the coaxial cable with PVC plastic.

2. Main Technical Parameter:
2.1 Inlet wire diameter: 0.8-4.0MM;
2.2 Finished diameter: 3.5-10.0MM;
2.3 Output capacity: 120 kg/hr (open the crosshead)
2.4 Line speed: Max 300 m/min (according wire specification).
2.5 Diameter control: Wire diameter precision control± 0.03, via diameter gauge control.
2.6 Foaming degree: (1) High pressure Max: Foam PE 78%
(2) Low pressure Max: Foam PE 50%
2.7 Gas pressure: 0.4Mpa, 15M3/Hr.
2.8 Wire tension: 0.5KG-3.5KG
2.9 Foam medium: High purity nitrogen(N2: 99%)
2.10 Water: 2m3/hr(Recycle and reuse, but should change once every 6 months)
2.11 All the pulley are proceed of anodized hardness treatment.
2.12Operation Direction: Either left or right (or buyer appoints).
2.13 Power supply: 380V, 3phase, 50 Hz, 5 wires.
Send your message to this supplier
Miss Lily Liu
To: Miss Lily Liu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now